850nm 10mW High Power VCSEL Diode with Flat Window, TO-46 Package

Model No. VCT-F85A31-OH

Features:

10mW High power VCSEL
1Gbps data rates
850nm wavelength range
Build-in monitor PD with cathode common type
Flat window Type TO-46 Can Package

Applications:

Sensing
High Speed Data Communications
Gigabit Ethernet
Fiber Channel

Absolute Maximum Ratings

Parameter	Rating
Storage Temperature	-40 to 100^oC
Operating Temperature	0 to 7^oC
Lead Solder Temperature	260^oC, 10 sec
Continuous Forward Current	30mA
Continuous Reverse Voltage	5V (@10uA)

Electro-Optics Characteristics (Ta=25^oC unless otherwise stated)

Parameters	Symbol	Min.	Typ.	Max.	Unit	Test Conditions
Threshold Current	Ith		5		mA	CW
Ith Temperature Variation	∆Ith		2.5		mA	Ta=0 to 70 ^oC
Slope Efficiency	η	0.2	0.4		W/A	If = 20 mA
η Temperature Coefficient	∆η / ∆T		-0.5		%/^oC	Ta =0 to 70 ^oC at 20 mA
Optical Output Power	Po		9		mW	If = 20 mA
Peak Wavelength	λP	840	850	860	nm	If = 20 mA
λP Temperature Coefficient	∆ λ / ∆T		0.06		nm/^oC	Ta =0 to 70 ^oC at 20 mA
Spectral Bandwidth (RMS)	∆ λ			0.85	nm	If = 20 mA
Forward Voltage	Vf		2.0	2.3	V	If = 20 mA
Breakdown Voltage	Vb		-10		V
Dynamic Resistance	Rd		20	30	Ohm	If = 20 mA
Monitor Current	Im		0.5		mA	P_o = 9mW
Im Temperature Variation	∆IPD/∆T		0.2		%/^oC	P_o = 9mW
Dark current	Id			20	nA	P_o =0mW,VR=3V
PD Reverse Voltage	BVRPD	30	115		V	P_o =0mW,IR=10µA
PD Capacitance	C			100	pF	VR=0V,Freq=1MHz
PD Capacitance	C			55	pF	VR=3V,Freq=1MHz

These specifications are subject to change without notice
The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD induced damage and/or degradation to equipment, take normal ESD precautions when handling this product.
The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification / identification label cannot be placed on the component itself.

Typical Characteristics

Mechanical Outline (unit: mm)

Pinout:

Pin# 1: LD anode

Pin#2: LD cathode/PD anode

Pin#3: PD cathode

Note: The above specifications are subject to change without notice.

PRODUCTS

VCSELs Communication Lasers Photodiode Receivers Optical Transceivers Fiber Optics Optical Components	Laser Diodes Laser Modules Laser Systems Laser Accessories Laser Products Fiber Coupled LEDs
For the code of Federal regulations, please refer to FDA PERFORMANCE STANDARDS FOR LIGHT-EMITTING PRODUCTS for detailed information.

CONTACT US

	Lasermate Group, Inc. 19608 Camino De Rosa Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909) 718-0998 Email: info@lasermate.com
HOW TO ORDER \| QUO & INFO REQUEST \| TERMS & CONDITIONS

Information contained herein is considered typical data. Lasermate Group, Inc. reserves the right to change or modify specifications of products at any time without notice.